The Solar and Wind Power Generation Project
The Solar and Wind Power Generation Project
Introduction...
This project will help you to generate the power through Wind and Solar and as well as help you to store the Energy in your batteries and you can also generate the power of 200W through this project. This project based on Arduino. You can use easily in Home Appliances.
Components...
Arduino Nano.
Lcd16x2.
Relay.
DC Motor.
Solar Panel (12v, 100W).
Battery (12v, 7.5A).
Diode(4007).
2N2222(NPN).
LEDs.
IC7805(Voltage Regulator).
Capacitor(470uF,35v).
R100K.
R4.7K.
R10K variable.
Jumper Wires.
2 pinConnector.
Diode(5806).
Circuit Diagram Link...
Code Link...
Thanks for visiting my Blog.
Thank you for this great project :)
ReplyDeleteWelcome....
DeleteThis comment has been removed by the author.
ReplyDeleteCan you post a photo of your battery Please. ( or the link where you sourced it )
ReplyDeletehttps://www.google.co.in/search?q=12v+7.5ah+battery&rlz=1C5CHFA_enIN780IN780&oq=12v+7.5A&aqs=chrome.0.0j69i57j0l4.3299j0j7&sourceid=chrome&ie=UTF-8
Great project - just completed the wiring and everything is ok with solar charge using a plugin 12vdc adapter, but when a 12v solar panel is connected the relay turns on for a second and then turns off - constantly. any ideas - using 12v 1.5w solar panel and a 12v 7.0Ah lead-acid rechargeable battery. P.S I have doubled checked the wires compared to the schematics.Many thanks Martin.
ReplyDeletei think issue in your voltage circuit...may be
Delete